Nigeria N0.1 online Medical Equipment store
When performing general chemical applications, it is important to have the right fume hood in order to protect the lab technician from inhaling toxic vapors. Often, people tend to confuse a biosafety cabinet with a fume hood. There is to say that they are different devices, because these devices utilize particulate filters, which do not remove chemical vapors, and they should not be working with any kind of chemicals.
A fume hood is a ventilation system that exhausts chemical fumes, vapors, gasses, dust mist and aerosol. They serve as physical barriers between reactions and the laboratory operator, offering a great protection against any inhalation exposure, chemical spills, run-away reactions and fires. These devices have a box-like structure with a moveable sash window. An extract blower and ductwork constantly and safely ventilate these devices’ hood. Fume Hoods are used to protect lab environment and operator during general chemical applications. By installing proper filter, it can also protect the environment.
The way a fume hood functions is by maintaining a relatively negative pressure in the hood interior to prevent any contamination from escaping while drawing air in through the hood opening at a consistent rate. There are some recommendations to keep in mind when it comes to handling a fume hood:
These fume hood models have specific features that makes them the ideal device to have in your laboratory. They a water sink and a water and gas remote control value with a water and gas tap. One of the advantages of owning these fume hoods is that operators are available to walk into the fume hood to operate if needed and they have a large room exhaust system, suitable for large laboratory instruments and equipment. The measurements for this fume hood model YR0103-4 model measurements are 1200 mm x 850 mm x 2200 mm on the external size and 1000 mm x 650 mm x 1500 mm on the internal size. In addition, the YR0104-4 model measurements are 1500 mm x 850 mm x 2200 mm on the external size and 1300 mm x 650 mm x 1500 mm on the internal size. Finally, the YR0105-4 model measurements are 1800 mm x 850 mm x 2200 mm on the external size and 1600 mm x 650 mm x 1500 mm on the internal size.
Fume Hood is used to protect lab environment and operator during general chemical applications. It actively protects operator from inhaling toxic vapors and dramatically reduces the risk of fire and explosion. By installing proper filter, it can also protect environment.